The use of should pay attention to daily maintenance.
Fasten parts, check whether the fastened parts can be loose or damaged. The method of acceptance is to find the same standard parts for conversion.
The cutting edge must be sharpened after long time use of the mold, and the cutting edge surface must be demagnetized after grinding.
In the process of mold application, it is most likely to show the appearance of broken and tortuous, and the punch sleeve is obviously broken. The parameters of the punch are primarily responsible for the local scale, the local scale of the device, and the length scale. The damage of the punch and the punch sleeve is obvious, and the parts of the same standard are used for conversion.
Pressing parts such as pressing plates, Uniglue, etc., unloading parts such as stripping plates, pneumatic ejectors, etc. When protecting, check the connection of various parts and whether there is damage, repair the damaged part, check whether there is air leakage in the pneumatic jacking material, and accept the detailed conditions.
The elastic parts such as the tension spring are most easily damaged in the process of use, and the human world shows the appearance of cracking and deformation. The method of acceptance is conversion. In the conversion process, you must pay attention to the standard and type of the spring. The standard and type of the spring are recognized through the three items of color, outer diameter and length. Only when the three items are the same. Can be converted.
Ningbo Fuerd was founded in 1987, is leading full-service die Casting Tooling, aluminum die casting, zinc die casting, Gravity casting manufacturer. We are a solution provider offering a wide array of capabilities and services that include engineering support, designing, molds, complex CNC machining, impregnation, tumbling, chrome, powder coating, polishing, assembly and other finishing services. We will work with you as partners not just suppliers.
– Full Service in Die Casting & Machining Since 1987
– Die Casting Machine from 180 to 4400 tons
– 1500+ Set of Casting Parts Exported Overseas
– Trusted By Top Brandings in Automotive & Medical Industry
– IATF 16949 Certificated Factory
– Famous“Die Casting City in China”
– Well-trained Staff Will Support You Efficiently From RFQ to Shipment.
Link to this article：Daily maintenance of die casting mold
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Silicone And Casting，Thanks